Skip to content
Please note: Any orders placed after the 28th March won't be shipped until the 2nd April 2024 due to the Easter break.
Please note: Any orders placed after the 28th March won't be shipped until the 2nd April 2024 due to the Easter break.

Redarc Gauge Boost + EGT With Optional Oil Pressure Display

by REDARC
Original price $500.00 - Original price $500.00
Original price
$500.00
$500.00 - $500.00
Current price $500.00
SKU G52-BEP

EGT & Boost Pressure 52MM Gauge

The REDARC 52mm EGT & boost pressure gauge is a must for your diesel turbocharged vehicle.

The G52-BEP is used to monitor the exhaust gas temperature (EGT) of turbo-equipped vehicles in conjunction with a pyrometer probe. EGT is an indication of how hot the combustion process is in a vehicles cylinders. Excessive EGT can cause engine or turbocharger damage. Many conditions can result in excessive EGT (i.e. too much fuel or not enough air) and are made worse when a vehicle is pulling a heavy load, climbing or running at continuous high speeds.

The boost pressure function monitors manifold air pressure and is used to ensure excessive pressure is not generated. By monitoring boost, you are able to keep the vehicle's engine components in the proper power range to achieve the most performance from your vehicle.

The gauge is supplied with a “K” type EGT sensor and electronic boost MAP sensor interface. The boost has a peak hold function with a display range from 0- 35 PSI and programmable alert level between 10 and 30 PSI. The EGT function also has a peak hold function with a range from 275 to 800 °C and is programmable between 500 and 800 °C. The EGT probe has a 1/8” NPT compression fitting and is supplied with a weld in mounting bung.

Oil Pressure Sensor*

The G52-BEP gauge also supports use with an oil pressure sensor. Monitoring oil pressure ensures the longevity of your vehicle and allows you to ensure that the correct pressure is maintained so that your car bearings are well lubricated. This is crucial when travelling at continuous high speeds and towing heavy loads. Low oil pressure can be an indicator of a low oil level, diluted or worn out oil, worn engine bearings, high oil temperature or a worn oil pump.

Enhanced Lighting Controller*

REDARC recommends the purchase of an Enhanced Lighting Controller (GA-ELC) with this gauge. The GA-ELC is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking.

The GA-ELC also allows you to program nighttime brightness and colour of your REDARC gauges, including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a daylight colour when you turn them off. The GA-ELC is also 24 volt capable.

 

 Mounting Cup

 GH-CUP

Features

  • Satin Chrome Bezel
  • 13 Selectable Backlight Colours
  • EGT and boost peak hold functions
  • Multiple programmable alert levels with amber or red backlight and audible beep
  • Display illuminates when park lights are turned on so you can check exhaust gas temperature and boost pressure without turning on the ignition.
  • If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once.

Kit Contents:

  • 52mm gauge with wiring harnesses for power/programming and connection to the sensor interface
  • MAP Sensor interface box
  • Diesel EGT pyrometer probe with 1/8” NPT compression fitting and 96” lead wire.
  • 1.8m Hose with T-Piece to tap into vehicle’s manifold boost/vac hose
  • K-Type thermo coupler
  • Weld in mounting bung
  • Mounting bracket with fasteners and P-Clip

 

 

 

Warranty 2 Years
Sensor(s) (Included) Boost EGT Interface
Sensor (Optional) GS-P-150
Standby Current Draw 30mA
Input (Operating) Voltage 6 - 16V
Height (mm) 42
Weight (kg) 0.05